The real format
60questions · 2 hours
Full mock exam
60 questions in 2 hours, spread across BS 7671 the same way as the City & Guilds 2382‑26 paper.
- Timed
- Answers at the end
- Flag and review
Updated for Amendment 4 and the 2382-26 exam. Try the free 20-question mock.
A4:2026City & Guilds 2382‑26, BS 7671:2018+A4:2026
For the City & Guilds 2382‑26 exam on BS 7671:2018+A4:2026
Example dashboard: three rings for questions today, lessons this week and readiness, above today’s session card.
Contents
Weighted like the 60‑question paper
9 modules · 39 lessons
Full course
Every lesson, question and mock
What’s included
City & Guilds 2382‑26
Based on BS 7671:2018+A4:2026
About 36 of 60. City & Guilds says approx., so aim well above it.
BS 7671 only: the On-Site Guide and Guidance Notes are not allowed. Tabs, highlighting and short cross-references are fine.
A non-programmable calculator, and you’ll need one.
You book and sit the 2382‑26 online test with a City & Guilds approved centre. The course doesn’t include the exam booking.
City & Guilds Level 3 Award in the Requirements for Electrical Installations BS 7671:2018+A4:2026 (2382‑26), Ofqual 603/3319/4. RegsReady is independent and isn’t affiliated with City & Guilds.
Example lesson screen: “How BS 7671 is numbered”, a free lesson, opening with the route to the regulation in your book.
Read this lesson freeShort, practical lessons with the route to every regulation they use.
Example practice screen: an exam-style question answered correctly, with the explanation, the regulation and the route through your book.
Every answer explained, with the regulation and where it is in your book.
Example “Find it in your book” drill: a question with no options, a 90-second clock and three ways to rate how you got on.
The question without options: find it in your own copy against the clock.
Example mock exam screen: question 23 of 60, 20 answered and 2 flagged, with 1 h 42 min left.
The real format: 60 questions in 2 hours, spread like the City & Guilds paper.
Example mock result: 44 out of 60, 73%, a pass, in a rating plate framed by the green-and-yellow earth stripe.
Your score by Part, with every question explained, so you know what to fix.
City & Guilds publishes how many of the 60 questions come from each Part of BS 7671. Each tab is as long as its share, and every full mock follows the same split, so a mock score means something.
Open a Part to see its lessons. 2 lessons are free to read now.
How the 2382‑26 exam works, how BS 7671 is numbered, how to tab and highlight your book within the rules, and how to find any answer in under two minutes.
What BS 7671 covers and what it doesn’t, the voltage bands, the fundamental principles of Chapter 13 and how the Regulations relate to the law.
The defined terms that the exam relies on: exposed and extraneous-conductive-parts, skilled and instructed persons, circuits, protective conductors and more.
Supplies and earthing arrangements (TN-S, TN-C-S, TT, IT), maximum demand and diversity, division of the installation, compatibility, maintainability and safety services.
The biggest part of the exam: automatic disconnection, disconnection times, RCD additional protection, SELV and PELV, thermal effects and AFDDs, overcurrent, voltage disturbances and SPDs, isolation and switching.
Wiring systems and cable installation, external influences, protective devices and their selection, earthing and bonding conductor sizes, other equipment, safety services and stationary batteries.
Initial verification and periodic inspection: the inspection checklist, test sequence, insulation resistance values, certificates and EICR classification codes.
Bathrooms and their zones, swimming pools, saunas, construction sites, agricultural premises, caravans and marinas, solar PV, EV charging and the other Part 7 sections.
Part 8 prosumer’s low-voltage installations and the appendices the exam draws on: statutory regulations, time/current curves, current-carrying capacity and voltage drop, external influence codes and energy efficiency.
The whole paper 60 questions
Each paper is spread across the Parts of BS 7671 like the real one. The strip on each card is that paper, one block per question.
The real format
60questions · 2 hours
60 questions in 2 hours, spread across BS 7671 the same way as the City & Guilds 2382‑26 paper.
30questions · 1 hour
30 questions in 1 hour, with the same spread. For when you can’t spare two hours.
20questions · 30 min
20 questions in 30 minutes. Builds the lookup speed you need on the day.
Plus topic practice for every Part, Smart review, a missed-questions drill, the “Find it in your book” drill and an Amendment changes drill.
Example readiness score of 72 out of 100, “Nearly there”: exam ready needs 80 or more and a passed full mock.
We don’t call you exam ready until your score is 80 or more and your latest full 60‑question mock is a pass. The real pass mark is approx. 60%, so you go in with a margin.
Something else? Send us a message.
Everything you need to know before booking the City & Guilds 2382‑26 18th Edition exam: 60 questions, 120 minutes, the approx. 60% pass mark, the open book rules and how the paper is split.
9 min readReadEvery change in BS 7671:2018+A4:2026, the Orange Book, explained in plain English with regulation numbers, plus what it means for the 2382‑26 exam and whether you need to re-sit.
9 min readRead15 practical tips for passing the City & Guilds 2382‑26 18th Edition exam first time, from weighting your revision and using the index to the 2-minute rule, mock strategy and a 4-week plan.
7 min readRead£79 once for 12 months. Lessons, the full question bank and unlimited timed mocks, on your phone or computer. Nothing renews.
Try it for 14 days. If it isn’t for you, message us within that time and get the full £79 back.